DPA 4006C

DPA 4006C

Kompaktikokoinen kondensaattorimikrofoni mm. kuoro-, kamari ja orkesterikäyttöön.

• Directional patternOmnidirectional

  Principle of operationPressure

  Cartridge typePre-polarized condenser

  Frequency response10 Hz – 20 kHz

  Effective frequency range ±2 dB10 Hz – 20 kHz

  Sensitivity, nominal, ±2 dB at 250 Hz36 mV/Pa; -28,9 dB re. 1 V/Pa

  Equivalent noise level, A-weightedTyp. 15 dB(A) re. 20 µPa (max. 17 dB(A))

  Equivalent noise level, ITU-R BS.468-4Typ. 27 dB (max. 29 dB)

  Distortion, THD < 1%133 dB SPL RMS, 136 dB SPL peak

  Dynamic rangeTyp. 121 dB

  Max. SPL, THD 10%146 dB SPL peak

  Switchable attenuator, filters etc.0 dB / -20 dB

  Rated output impedance200 Ω

  Minimum load impedance2

  Cable drive capability100 m (328 ft)

  Output balance principleImpedance balancing with Active Drive

  Common mode rejection ratio (CMRR)> 60 dB

  Power supply (for full performance)P48 (Phantom Power)

  Current consumption2.8 mA

  ConnectorXLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: – phase

  Weight163 g (5.7 oz)

  Microphone diameter16 – 19 mm (0.6 – 0.75 in)

  Capsule diameter16 mm (0.6 in)

  Microphone length170 mm (6.7 in)

  Maximum output voltage, RMS8.0 V

  Polarity+V at pin 2 for positive sound pressure

  Temperature range-40°C to 45°C (-40°F to 113°F)

  Relative humidity (RH)Up to 90 %

  Matching tolerance (frequency response and sensitivity)±0.5 dB

  Phase deviation for kit< 5°

  ColorsMatte black